Maxon

*#9922# - menu, reset (without SIM)

*#9900# - Software Version

*#9901# - Software Version (PBatch)









S60 Siries (SX1, 6600, N-Gage..)

*#7780# - factory default

*#7370# - full factory defaults (all user data reset)

SX1 formating - * + # + power on

6600 formating - 3 + * + send + power on

Sendo X1 formating - 5 + power on









Mitsubishi

*65512890 (*-hold) format FFS (Eclipse)



* 3926 - (*-hold) test mode



* 5806 - (*-hold) SW version



*(hold) 787090 - trium 320 unlock menu









Huawei (cdma)



MASTER SECURITY CODE

-309296

-3092

-9296





Pantech HX-550C (cdma)



Full reset (phone code reset)- ##03*934#9367*192#397#7412569746 PWR,

after reset - ##27732726 PWR and select "with uim"











Samsung





#7465625*638*12345678#



::Service Codes::



Alcatel

Master Codes

- 25228352

- 25228353

- 83227423 (***/4,BH4,BF5,BG3,BF3/4..)



###337*07# - master reset (with SIM)

###847# - factory reset (with SIM)



Alcatel 835 formating - **0102#







Samsung

*2767*3855# - FULL E2P RESET

*2767*2878# - CUSTOM E2P RESET

#*7337# - UNLOCK

*2767*688# - UNLOCK

*#0523# - CONTRAST

*#9998*523# - CONTRAST

*#8999*8378# - Service Menu (X100)





Philips



#20021208# ok - 630 without SIM (erase flash)

*#7728*# - RSAV DONE c630 reset

*#3849*# - ??? reboot

*#3851*# - ??? reboot

Philips 568 *01763*737381# - reset





Pantech

*01763*737381# - master reset (user data, user code) without SIM

*01763*8371# - SW version

*01763*6371# - UNLOCK

*01763*3641# - Menu





Panasonic



*01763*737381# - master reset (user data, user code) A100, A101, A102,G50, G51, G70, GD55..

*369#(*) - MENU



7, 4, 6, menu, menu - lock menu

*#9999# - 5 sec after power on - SW version (GD75, GD67, GD87..)











Sony-Ericsson

> * < < * < * - Service menu



< * * < - Lock menu



j300 lcd reset



( -> *1*2*1* )



VK Mobile



*#79# - SW version

*#85*364# (*) - hold menu

855855# without SIM (VG107)

85558555#(*)-hold

4268#(*)-hold (VG207)





VKMobile?



Code 1: *#85*364# (hold * key in few second) --> Enter the hidden menu

Code 2: 3807 # (hold * key in few second) --> Enter the test mode.





Voxtel

0124 - master code

0718#(*)- hold - menu (ST11, SC10, V100 without SIM)

4268#(*)- hold - show code (ST11, SC10 without SIM)

*789(#)- hold - menu (V50, V300, RX100 without SIM)







Motorola

(T190, T191, T205) master code



- 19980722



- 20010903



**********



P2K test menu:

*#06#, menu, menu, 048263*



Test comands:

32*116*1*0*0 - read phone code

32*118*1*0*0 - read security code

18*0 - factory reset, phone code off

18*1 - master reset

54*18*1 - full phone reset

10*0*6 - select 900/1800

32*279*1*0*8 - model

32*383*1*0*0 - flex version



Hard reset MPX200, MPX220 - blue button + power on





Nokia

*#7370925538# (valet code reset) 6230

*#746025625# [*#sim0clock#]

*#92702689# [*#war0anty#]



9210i formatting



remove the battary



Hold down Ctrl + Shift



put in the battary



keep waiting and holding the Ctrl + Shift



when you see the nokia hands logo press ( F )



Fly Bird

S688 - #*301#02# send - with SIM

menu:

7 - 10 - ok,



#*8000#, #*3676# (reboot repair)



V09, S1180 - *, 3 times down, 3 times up - service menu





Enol

*#987*00# - Service menu

*#987*99# - Full reset

*#900# - SW version









Maxon

*#9922# - menu, reset (without SIM)

*#9900# - Software Version

*#9901# - Software Version (PBatch)









S60 Siries (SX1, 6600, N-Gage..)

*#7780# - factory default

*#7370# - full factory defaults (all user data reset)

SX1 formating - * + # + power on

6600 formating - 3 + * + send + power on

Sendo X1 formating - 5 + power on









Mitsubishi

*65512890 (*-hold) format FFS (Eclipse)



* 3926 - (*-hold) test mode



* 5806 - (*-hold) SW version



*(hold) 787090 - trium 320 unlock menu









Huawei (cdma)



MASTER SECURITY CODE

-309296

-3092

-9296



Huawei ETS-668, 678, 688, etc Nam Programming:

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu





Pantech HX-550C (cdma)



Full reset (phone code reset)- ##03*934#9367*192#397#7412569746 PWR,

after reset - ##27732726 PWR and select "with uim"







NEC



Repair please wait on NEC N2xx



*#3727372#

IMEI *#06#



Version * # 2820 #

hardware reset *73738# (send?)

Lock info * # 3210 # (send?) - SP lock

* # 8140 # (send?) - Net lock

SIM LOCK

*#4960 # (send?) - info

*4960*pass*pass#(send?) -lock

#4960*pass#(send?) -unlock



Lock Status * # 3210 # (send?) - SP lock

* # 8140 # (send?) - Net lock





*#CODE#

CODES :

06 IMEI

7468658 SIM INFO

746255 SIM INFO

7464674 IMSI

2820 SW WERSION

79837 SW + DSP WERSION

49837 ****************

79786 Checksum

28453 Build Levev

737425 SERIAL NUMBER !!!!

73738 -

737247 Reapir History

7463424 SIMM Diagnostics

284538 Build Date

84769 Power ON

497837 Hysteresis

3643278746 Enhanced speed

3648658746 3 Volt Sim

347722 Clear Cause

627538 Market

7320 Network Lock

4960 USIM Card Lock

3210 SP Lock

8140 Coorporate Lock

5830 Unlocking Code !!!

6210 MSISDN - Current Phone Number







TSM



To check lock type in TSM3/4/5/5m?

Turn ON the phone and type: *#9917#



To enter Unlock Code in TSM100?

Type: ****987 + Call



To Enter Unlock Code in TSM100v/TSM30?

Type: ##**9987 + Call





SHARP



sharp reset EEP



1, push at once key 0+3+right option key up+red key (white screen)

2, in sequence push key 0,1,2,3, right option key up,1 (service menu)

3, write 99 and push right option key up

4, write 01 and push right option key up (now start RESET EEPROM)

Wait.....

5, push any key

6, push blue key menu (save)

7, power off



////////////////////////////////////////////////////////////////////////////////////////



Sharp GX-10 unlock solution



With Sim Card (of locked network) in phone:

*01763*6371# and press M.

In menu go to: SETTINGS->SELECT->SECURITY

then in Security menu:MEP LOCKS->SELECT

insert default security code 0000

In menu go to NETWORK and choose DEACTIVATE

press SELECT and insert 812664697614

Press OK, phone anwser will be: DONE .

phone unlocked



Sarp Gx15/20/30 Tm100



Phone is on test mode

you can see **** on phone display

For finishing unlock folow the next steps :

Press 1 on phone keypad

Press 99

Press right top key

Press 3 FOR UNLOCK

or Press 1 FOR FACTORY DEFAULT

Press roight top key

Wait to see on display format ok

Press right top key 3 times or more until phone is off









MAXON

for MAXON

*#9917#

#9917*network code#

#9917*part IMSI#

#9917*simlock SLPUK#

#9917*IMSI#



SG1000 Master Code Unlock 24681357

SG1000 Security Code Unlock *#*#1705#46 +ok (EEP reset)

this code is for enter in serviçe menu *#*#1705#





for innostream:

*741*7373868# reset ok



heck version *888*837#



Engineering Mode *888*888#



Master Reset *741*737381#



*741*737381#

*741*737382#













THOMSON





the code 49006045

AND TO ENTER CODE PUT 878 wit sim



Sony



Codes for the J-Series

*#06# : Displays IMEI number



*#00xx# : Changes language (xx is your country code)



*#000# ... *#0000000# : Resets language to auto-selection



*#7465625# = *#simlock# : Displays SIM lock status



*#7353273# = *#release# : Display firmware version



*#78737322867973738# = *#superfactoryreset# : Resets personal data (remove SIM card first)



*#73287489263373738# = *#securitycodereset# : Resets security code to 0000 (remove SIM card first)



*09*(PIN code)# : Turns PIN code on



#09*(PIN code)# : Turns PIN code off







Sagem



If you search here in the forum sure you will find the answer , this forum is really a big library then next time i suggest ti you to use the usefull search button.....

For example your IMEI is 35074635268234-2

take the four last digits without the 15th digit

you have 8234 ----> 8+2+3+4 = 17 modulo 10 = 7 then x =7

if your firmware is

DJ3,5C or DJ3,5D or DJ3,5E or DH3,5H then y=5

else if your firmware is

DF4,5E or DF4,5F or DH4,6J or DJ4,6G or DG4,5H or DI4,6G then y=4

else if your firmware is

JC3,6N or JC3,6O or JC3,6L then y=2

Now power on your phone without sim and put : *226632623XY and Ok

Salam





For the last time on this forum...



TEST MODE CAN'T BE ENTERED ON MYX3D, MYX5D, MIX5M, MYX6 SAGEM MODELS !!! SO STOP POSTING STUPID REQUESTS FOR TEST MODE CODE FOR THESE PHONES. STOP MYX6 UNLOCK CODE REQUESTS AS THERE IS NO CALC FOR IT YET AND PROVIDED FIELDS ARE UNUSEFULL.



TEST MODE CAN BE ENTERED ON MW/MC9XX, MW/MY30XX, MYX3, MYX5:



FOR MW/MC9XX:

*0287257X WHERE X IT'S AN NUMBER BEETWEN 0 AND 9



FOR MW/MY30XX:



WITH DX4,X FIRMWARE

*2266326234Y WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10.



WITH DX3,X FIRMWARE

*2266326233Y WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10.



FOR MYX3, MYX5:

*226632623XY WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10. X IT'S FIRMWARE DEPENDENT AND CAN BE A NUMBER BETWEEN 0 AND 9.



U CAN ACCESS FIEL 94 ? THAT'S PERFECT ! WRITE TO FIELD 94 VALUE 0X01 AND U'LL PHONE (M51 AND ABOVE MODELS) WILL BE IN PERMANENT TEST MODE.



Qantech

sp unlocking

*01763*737381#





CDMA Secrets And GSM Secrets



CDMA CODES

<>

Samsung sph-n240, n400, a460, a500, etc Nam Programming :

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming :

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69

Samsung a300, a530, a610, a620, a660, a670, etc Nam Programming :

Nam Set: Menu, 6, *

Nam Set: ##3238, ok

Nam Set: ##SPC (##000000), ok

Service Menu: Menu, 9, *

Test Mode: 47*68#13580

Test Mode: 47*869#1235

Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam Programming :

Nam Set: 6548#0**4#6

Nam Set: 47*869#08#9

Nam Set: 74153697193

Test Mode: 5809540*45680 (88 - efs clear)

Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415

Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415

Samsung N356 (India version) Nam Programming :

Test Mode: Menu, 5, down arrow, *

Test Mode: **00## (in some flashes)

Samsung i700, etc Nam Programming :

Nam Set: Go to start and select "PHONE" from the drop down menu, dial #83587

Samsung i300, etc Nam Programming :

1. Tap on the Phone Icon with stylus

2. Press #907*9#0 ENTER LOCK should appear on screen

3. Enter OTKSL

4. SVC MENU will appear press 1

5. Enter 10 digit MIN and then press SAVE

6. Press SAVE again

7. Press 3 and then press SAVE 6 times

8. Enter the HOME SID and press SAVE once

9. Press END key twice

<>

Qualcomm qcp-800 Nam Pogramming :

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc

Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming :

Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok

Tips:

On some kyocera handsets the factory service module has not been disabled

and the phone can be programmed without the spc by inputting.

Nam Set: ##333333 menu (service)

<>

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming :

Nam Set: ##Spc+Ok+Key Down+Ok

Advanced Setup: ##3282+Ok+Key Down+Ok+Msl

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)

Sanyo scp-A011, smp-A017, etc Nam Programming :

Nam Set: F9(3 beep) + 0*72696#767

<>

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#

Nokia 8887 Nam Programming :

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#

Nokia 8587 Nam Programming :

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#

SPC Unlock, Factory Reset :

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)

NOKIA TEST MODE:

51xx, 61xx, 71xx, 3285, 63xx, etc :

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 0 0 and then choose OK.

3360, 6360 :

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.

<>

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :

(Power the phone on and wait until the little light on top goes out)

Nam Set: 289+fcn+#+1

Service menu: fcn+00+fsc(000000)

Test Mode: Hold (2,*,Rcl)+Power

Test Mode Commands:

99 - download - flash phone

124 - inam data write

125 - version

126 - esn read

127 - sec_code

128 - lock_code

129 - is WFTV data write

137 - FSC code

138 - NPcode (nam program code)

139 - dscode

141 - restart

218 - Read_Addr

000 - is cdma mode

001 - is fm mode

002 - is pcs mode

008 - is reg read addr

020 - is lna_range

Audiovox pcx-3500xl Nam Programming :

Nam Set: ##2726+Send+1998+1+Spc+1

Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming :

Nam Set: ##20022002+Pwr+1+Spc

Audiovox 8610, 8910, etc Nam programming :

Name Set: ##847446, end, 111111

Audiovox-107 Nam Programming :

Nam Set: 45680*47*869#1

Audiovox CMP-3 Nam Programming :

Nam Set: 45680*47*869#1

Dm Mode: Menu, 6, 6

Audiovox 9950 Nam Programming :

Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming :

Nam Set: m + # + envelope key + * + 1

Audiovox Thera (Toshiba 2032) Nam Programming :

Thera Nam Programming User Manual - nam_thera.pdf

AUDIOVOX TEST MODE :

9100, 9155:

1) Turn on the phone. As soon the phone comes on and the green light

turns off press RIGHTARROW, 0, 0. The phone will ask for the

"FSC Code", press 000000 then choose OK and press RIGHTARROW,

RIGHTARROW. Your phone is now in test mode.

2) The signal strength is the number on the top right hand side of the screen.

3) To turn off test mode shut of the phone and then turn it back on.

<>

Motorola 7760, 7860, 2260, 8160, etc Nam Programming :

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 7466 3 #, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc Nam Programming :

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284

Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola t182, c210, etc Nam Programming :

Nam Set: ##1111 end

Nam Set: ##298645665 end

Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc Nam Programming :

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#

Motorola StarTac 2004 Nam Programming :

Nam Set: 5759789*#, rec key (3)times (spc - 915037)

Motorola ms200, ms230, etc Nam Programming :

Nam Set: 5759789*# (spc - 915037)

Motorola v6060 Nam Programming :

Nam Set:147*369#456*0#

Motorola Razr V3C Nam Programming:

Nam Set: 74663 # clr clr

Nam Set: #073887* , then SPC

MOTOROLA TEST MODE :

v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says "DISABLE" instead of

"ENABLE" and choose select.

Motorola Bible - bible.txt

<>

lgc-300, etc Nam Programming :

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**

lgc-330w, etc Nam Programming :

Nam Set: Menu, 4, 0, Spc

A-key: 2539**

lgc-510, v111, etc Nam Programming :

Nam Set: Menu, 3, 0, Spc

A-key: 2539**

lgc-500, 800w, etc Nam Programming :

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**

Lg LX,VX-series, VX4400, VX6000, etc Nam Programming :

Nam Set: ##Spc

Nam Set: Menu, 0

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786,ok

<>

Sky All Models Nam Programming :

Nam Set: #7583538324#626#

Nam Set: *759#364*7388464#

Min simple mode: #758353266#646#

Irm simple mode #758353266#476#

Voice memo: #8767#277#

Test Mode: #7583538324#8378#

A-key: #758353266#2539#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc

<>

Withus wce-100, 200, 300, etc Nam Programming :

Nam Set: ##948487+Save

Nam Set: ##948482+Save

Nam Set: ##66835+Save

SMS Settings: ##76766

NVM Rebuild: ##777464

<>

Hyundai hwp-110 Nam Programming :

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)

Hyundai hgc-120, 130, 200 Nam Programming :

Nam Set: #86904**89397#

Hyundai hgc-310, 600, 610 Nam Programming :

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming :

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code

A-key: 2539**

Debug Menu: ##27732726+Pwr

Sar Test: ##27752345+Pwr

Baud Rate: ##36**+Pwr

DM Mode Enable: **1004+Pwr

DS Mode Enable: **1005+Pwr

Test Bell/Voice/Led/Dot: ##1122+Pwr

RF Mode: ##2240+Pwr

Ras Ram: ##2774+Pwr

Cmux1: **0481+Pwr

Cmux2: **0482+Pwr

RX Mode Fax: **0492+Pwr

RX Mode Data: **0491+Pwr

RX Mode Reset: **0490+Pwr

<>

Huawei ETS-668, 678, 688, etc Nam Programming :

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu

<>

Ericsson A1228c, T61, etc Nam Programming :

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu

Sony-Ericsson T608 Nam Programming :

Nam Set: 923885, Joystick to the right, 111111

<>

Epsilon vc-5x Nam Programming :

Nam Set: **147258963##

Programming1: **1232580##

Programming2: **321456987##

Version: **1470963##

Debug: **000000##

Menu_1: **078987##

Menu_2: **1234756##

A-key: 2539**

Reset: **14789##

<>

VK-100C, 110C, 200C, etc Nam Programming :

Nam Set: 153147539741593

Test Mode: 153147539123258 (88 - clear efs)

< >

Z510, Z710i(gcd-456) Nam Programming :

Nam Set: Menu+0+Spc

<>

AMC450 Nam Programming :

Nam Set: *74269#*748#96148063+SEL

<>

ZTE C150 Nam Programming:

Nam Set: *983*3641#

<>

Gtran gcp-2000 Nam Programming :

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc

Gtran gcp-5000 Nam Programming :

Debug Mode: 01#727+Spc

Test Mode: 01#765

<>

PANASONIC TEST MODE :

Panasonic (Most):

1) Turn on the phone. Press #7764726# choose SEND

2) Scroll down to where it says "NAM 1" and choose OK. Scroll down

to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"

and choose EDIT.

3) Press 1 and choose OK then choose BACK. The phone will say

"Back To Level 1" choose YES. Now choose EXIT the phone will ask you

"Exit And Save Change" choose YES.

4) Signal strength is the top right number on the screen.

5) To turn off the test mode follow the above sequence except press 0

instead of 1 at the "Built-In-Monitor"

<>

Synertek S200 Nam Programming :

Nam Set: Menu+0+Spc

Debug Mode:

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

Unknown code: ##325+Save

<>

Sony CM-M1300, 3300, Z200 Nam Programming :

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc

How to remove memory card Password

Click Here

GSM CODES

LG

To see version on LG 81X0

277634#*#

To enter unlock code :

2945#*88110#

IMEI (ALL): * # 06 #

IMEI and SW (LG 510): * # 07 #

software version (LG B1200 ): * 8375 #

recount cheksum (LG B1200 ): * 6861 #

factory test (B1200): #PWR 668

unknow (LG 500 ): 8060#*

unknow(LG 200 ) *789# + send

unknow (LG 500 ): 9270#* and 9278#*

Simlock menu (LG B1200): 1945#*5101#

Simlock menu (LG 510W, 5200): 2945#*5101#

Simlock menu (LG 7020, 7010): 2945#*70001#

Simlock menu (LG 500, 600 ): 2947#*

lg 5300 :2945#*5301#

how to read data calcfor LG510w:

just read button not read cal. data

adress: 0x1000004

size: 0x438

then read.

MAXON

*#9917#

#9917*network code#

#9917*part IMSI#

#9917*simlock SLPUK#

#9917*IMSI#

SG1000 Master Code Unlock 24681357

SG1000 Security Code Unlock *#*#1705#46 +ok (EEP reset)

this code is for enter in serviçe menu *#*#1705#

Mitsibushi

*#06# View IMEI

*#0044# English

*#0049# Deutsch

hold * 4329 Net Monitor1

hold * 621342 Net Monitor2

hold * 5472 M4 Testmode

hold * 5806 SW version

hold * 5807 HW version

hold * 936505 SW and HW version

hold * 482896 CP Lock Menu

hold * 574243 NS Lock Menu

hold * 967678 SP Lock Menu

hold * 362628 IMSI Lock Menu

hold * 787090 Lock net.level

hold * 787292 Lock net.level

Firmware Press and hold C, enter 597, release C

secret menu Press and hold C, enter 987, release C.Press OK

debug mode Press and hold C, enter 397, release C

phase-2 mode Press and hold C, enter 499, release C

Turn off phone Press and hold C, enter 999, release C

Motorola

*#06# Imei Number.

Motorola 8400 Secret Codes

IMEI Nummer *#06#

Telefonbuch“ aus dem Menü l?schen [],[],[],003,[],1,[] und “okay”

Telefonbuch“ im Menü hinzufügen [],[],[],003,[],0,[] und „okay“

Monitormodus [],[],[],113,[],1,[]

Monitormodus deaktivieren [],[],[],113,[],0,[]

Ausgangszustand [],[],[],070,[],0,[]

Motorola 8700 Secret Codes*

IMEI Nummer *#06#

Telefonbuch“ aus dem Menü l?schen [],[],[],003,[],1,[] und “okay”

Telefonbuch“ im Menü hinzufügen [],[],[],003,[],0,[] und „okay“

Monitormodus [],[],[],113,[],1,[]

Monitormodus deaktivieren [],[],[],113,[],0,[]

Ausgangszustand [],[],[],070,[],0,[]

Motorola T 2288 Secret Codes

IMEI Nummer *#06#

Motorola P 7389 Secret Codes

IMEI Nummer *#06#

Motorola L 7089 Secret Codes

IMEI Nummer *#06#

Motorola V 3688 Secret Codes

IMEI Nummer *#06#

Motorola V 3690 Secret Codes

IMEI Nummer *#06#

** Das Zeichen [] erhalten Sie, indem Sie die *-Taste l?nger gedrückt halten



////////////////////////////////////////////////////////////////////////////////////////////////////////



NEC

IMEI *#06#

Version * # 2820 #

hardware reset *73738# (send?)

Lock info * # 3210 # (send?) - SP lock

* # 8140 # (send?) - Net lock

SIM LOCK

*#4960 # (send?) - info

*4960*pass*pass#(send?) -lock

#4960*pass#(send?) -unlock

pass is 8 digits



Lock Status * # 3210 # (send?) - SP lock

* # 8140 # (send?) - Net lock

code for repair n21 n22 n223

*#3727372#

Nokia

Nokia 1610 Secret Codes

IMEI Nummer *#06#

Software Version *#170602112302#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Nokia 2010 Secret Codes

IMEI Nummer *#06#

Software Version *#9999#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Nokia 2110 Secret Codes

IMEI Nummer *#06#

Software Version *#9999#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Nokia 2110e Secret Codes

IMEI Nummer *#06#

Software Version *#170602112302#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Firmware-Datum *#3283# bzw. *#DATE#

Nokia 2110j Secret Codes

IMEI Nummer *#06#

Software Version *#682371158412125#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Firmware-Datum *#3283# bzw. *#DATE#

Nokia 3110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000# bzw. *#9999# bzw. *#3110#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Werkseinstellungen *#7780#

Simlock info *#92702689#

Nokia 3210 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Nokia 5110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4

Nokia 5120 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4

Nokia 5130 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4

Nokia 5190 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Provider lock status *#pw+1234567890+1

Network lock status #pw+1234567890+2

Provider lock status #pw+1234567890+3

SimCard lock status #pw+1234567890+4

Nokia 6110 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Nokia 6130 Secret Codes

IMEI Nummer *#06#

Software Version *#9999#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92772689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

6. Seite insgesamte bisherige Telefonzeit (min)

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Nokia 6150 Secret Codes

IMEI Nummer *#06#

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

EFR de/aktivieren *#3370#

Half Rate de/aktivieren *#4720#

Testmodus aktivieren *#746025625#

Nokia 7110 Secret Codes

IMEI Nummer *#06#

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

Nokia 8110 Secret Codes

IMEI Nummer *#06#

Software Version *#8110#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Servicemenü *#92702689#

1. Seite IMEI

2. Seite Herstellungsdatum

3. Seite Kaufdatum

4. Seite Letzte Reparatur/Upgrade

5. Seite Transfer User Data

Testmodus aktivieren *#746025625#

Nokia 8148 Secret Codes

IMEI Nummer *#06#

Tastensperre MENU + *

Lautlos MENU + #

Nokia 8810 Secret Codes

IMEI Nummer *#06#

Software Version *#0000#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Seriennummer *#92702689#

1. Screen Herstellungsdatum

2. Screen IMEI

3. Screen Kaufdatum

4. Screen Letzte Reparatur

Nokia 9000 Secret Codes

IMEI Nummer *#06#

Software Version *#682371158412125#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Firmware-Datum *#9999#

Nokia PT11 Secret Codes

IMEI Nummer *#06#

Software Version *#9999#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Nokia PT11NF Secret Codes

IMEI Nummer *#06#

Software Version *#170602112302# bzw. *#682371158412125#

1. Zeile Software Version

2. Zeile Datum der Software

3. Zeile Typ des Telefons

Firmware-Datum *#3283#

Panasonic

GD55/G50/G51/G70/A100/A101/A102/X300: with or w/o SIM press *#369# and go to menu ?°SW Version?±

- GD67/GD87/X60/X66/X100/X200/X400/X500: with SIM press *#9999# while phone searching for network

- X200 : with SIM press #02# while phone searching for network

- X6X : Power on the phone with valid sim card and tape this code : 52824**

then tape 746, Menu, Menu then enter your code
Philips

PHILIPS DIGA *#06# IMEI

*#3333*# Blocking list

*#2558*# All time connected

*#3377*# IMEI,FLAGS,SIM LOCK

*#7489*# Security code ???

*#3353*# clear Blocking List

PHILIPS FIZZ *#06# IMEI

*#8377*# Software version

*#1234*# Security code

*#5644*# Service code

PHILIPS SPARK *#06# IMEI

*#2254*# Status register

*#2255*# Some kind of monitor mode during dialing.

*#2558*# Time connected to net.

*#2562*# ??? number of reconnections

*#2565*# Warm restart

*#3333*# BLOCKINGLIST

*#2377*# ???BERR Phone waits random time and reconnects to network.

*#3377*# Information, SIM-lock

*#7378*# SIM info

*#7489*# SECURITY CODE

*#7693*# Sleep mode

*#7948*# Turn off phone

*#8463*# Information on sleep mode

PHILIPS GENIE *#06# IMEI

*#2254*# STATUS REGISTER

*#2255*# Some kind of monitor mode during dialing.

*#2377*# ???BERR reconnect?

*#2355*# Near Cell Mode. U can see parameters of three nearest cells

*#2558*# Time connected

*#2562*# number of reconnections

*#2565*# Warm restart

*#2772*# Base Station Paging Multiframe.

*#2847*# HIDDEN MENU!: 5.5:Closed User Groups

*#3333*# BLOCKING - list

*#3353*# clears Blocking list

*#3377*# SIM LCK

*#4263*# Hs-OK:0 KO:0 , HNS-OK:0 KO:0

*#4377*# ??? battery charging ???

*#7378*# SIM phase

*#7489*# Security code

*#7693*# SLEEP-mode

*#7948*# Turn off

Samsung

E710/715

*#32436837# DAI ON Digital Audio Interference On

*#3243948# DAI OFF Digital Audio Interference Off

*#9324# MONITOR

*#0746# SSMS MEMORY:20

*#0842# vibra on

*#0289# buzzer on

*#4357# HELP (4357) This screen!!!!!!!

*#7777# verze SW

*#8888# verze HW

*#9999# Revize HW

*#0782# cas provozu, zapnit? a vypnit? - LIVE TIMER

*#0523# 41 (80) menu: 12

*#0638# SIM: f23003 F230 030

*#0778# SST size: 10

*#9273696# Java D/L setting

*#92782# Wap user agent

*#9998*5646# change operator logo at startup

*#9998*76# production number

*#9998*968# view melody for alarm - YAMAHA OK

*#0778# Sim Service table

*#9998*523# or *#9998*0523# or *#0523# Display Contrast

*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos

*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)

E700/S500 100%..... X100/X600???!!!???

#*566335# Wap model ID

#*5663352# java model

#*5663351# model

#*53696# java download mode

#*536963# serial enabl others disabled

#*536962# HTTP enabl WAPSAR disabled

#*536961# WAPSAR enabl HTTP dis

*663867 MF file dumped

*335 All MMS mes deled

*2767*77667# Spain MMS settings

*2767*78667# Portugal

*2767*65667# Netherland

*2767*29667# Czech

*2767*28667# Austria

*2767*48667# Italy

*2767*37667# France

*2767*85667# Uk

*2767*33667# Germany

*2767*73738927# MMS Reset????

*2767*77927# Spain WAP Setting are applied

*2767*78927# Portugal

*2767*29927# Czech

*2767*65927# Netherlands

*2767*28927# Austria

*2767*37927# France

*2767*48927# Italy

*2767*85927# Uk

*2767*33927# Germany

#7263867# Ram Dump On

#*3232# Current Mode - DCD mode

#*3231# DCD en TRACE dis

#*3230# TRACE en DCD dis

#*7247# ??????

#*3683# ??????

#*3777# ??????

#*3779# ??????

#*8645# ??????

#*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in cihard. opt

#*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in cihard. opt

#*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt

#*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt

*#7465625# Stav z?mku

#7465625*28746# Aktivn? z?mek deaktivov?n

*7465625*28746# Automatick? z?mek perzonalizov?n

#7465625*2827# Z?mek Auto CP deaktivov?n

*7465625*2827# Z?mek s?te se mus? aktivovat

#7465625*2877# Z?mek Auto SP deaktivov?n

*7465625*2877# Z?mek s?te se mus? aktivovat

#7465625*28782# Automatick? z?mek podskupiny deaktivov?n

*7465625*28782# Z?mek s?te se mus? aktivovat

#7465625*28638# Automatick? z?mek s?te deaktivov?n

*7465625*28638# Automatick? z?mek s?te perzonalizov?n

#7465625*228# Aktivn? z?mek deaktivov?n

*7465625*228# Aktivn? z?mek perzonalizov?n

#7465625*746* ???????

*7465625*746* ???????

#7465625*27* ???????

*7465625*27* ???????

#7465625*77* ???????

*7465625*77* ???????

#7465625*782* ???????

*7465625*782* ???????

#7465625*638* ???????

*7465625*638* ???????

*#8377466# SW + HW info

*#8888# HW info

*#9999# SW info

*#8999*8376263# komplet info

*#8999*636# IPD info

#*2677# ARM state: None

#*0000# ??????

*#8999*324# Net monitor??

#*6200#

#*6700#

#*6900#

#*7200# neplatn? ?roven pr?stupu

#*6100# command #*6100# Executed

*2767*3700# SGH-E700 BSI

*2767*7100# SGH-S100

*2767*8200# SGH-V200

*2767*7300# SGH-S300

#0111*codigo#

*2767*637#

*2767*688#

*2767*wap#

*2767*media#

*2767*mms#

*2767*226372# Camera Reset

*2767*688# MEP off

*2767*927# WAP

*2767*2878# E2P Custom reset

*2767*3855# E2P Full reset

*2767*2878# Sec reset

#*7828# C??? Midi Ri51

#*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff

#*2562# nejakej reset

#*2565# no blocking General Defense

#*3353# General defense Code Erased

#*3837# reset ???????

#*3849# reset ???????

#*3851# reset ???????

#*3876# reset ???????

#*7337# reset ???????

#*5376# reset All SMS Deleted

#*7222# Operation Typ: Class C GSM

#*7224# Error!!!!

#*7252# Operation Typ: Class B GSM

#*7271# multi Slot Class 1 GPRS

#*7274# multi Slot Class 4 GPRS

#*2787# CRTP on - Batery options

#*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0

#*3825# Command #*3825# Executed

#*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40

#*7288# GPRS Detached

#*7287# GPRS Detached

#*7666# SrCell data RAC 255 NMO 255

#*7693# Sleep Deact

#*7284# Class B

#*2256# Calibr - info

#*2286# DATAbattery

#*2527# GPRS switching set to class 4

#*2679# Copycat feat. Activated

#*3940# External looptest 9600bps not avalible in SYSOL2!

#*4263# handsfree mode Activated

#*4700# Half rate deact

#*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in cihard.opt

#*8462# Sleeptime sinc SwitchOf

#*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt

#*3370# EFR Deact

#*3941# External looptest 115200bps not avalible in SYSOL2!

#*5176 L1 Sleep TOI N:5 TOI P:0

#*7462# SIM phase 3

#*7983# Voltage/Freg Deact

#*7986# Voltage Activated

#*8466# Old time

#*2255# Call failed mode: Command not Implemented

#*2285 nic

#*46539 nic

#*5143 nic

#*7629 nic

#*7646 nic

#*7665 nic

#*7633 nic

#*7626 nic

#*5174 nic

#*5175 nic

#*5177 nic

#*5156 nic

#*2282 nic

#*5132 nic

#*7276 nic

#*2355 nic

#*3333 nic

#*3377 nic

#*5187# L1C2G trace Activated

#*6837# Official SW version: 120107A1

#*7524# KCGPRS: +data

#*7562# LOCI GPRS: +data

#*7638# RLC allwazs open ended TBF Actiated

#*7632# Sleep mode Debug: +data

#*7673# Sleep mode RESET

#*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED

#*2474# For Cmd set DEBUGBATTERY in cihard.opt

#*2834# Audio Pth Mobile Normal

#*3270# DCS support Deact

#*3282# Data Deact

#*3476# EGSM Deact

#*3676# falh volume formated

#*4674# IMSI: +data

#*4760# GSM Activated

#*4864 pro tento model nic

#*5171 data

#*5172 data

#*5173 data

#*7326# Accessorz: vibrator

#*7676# Command #*7676# Executed

#*7683# Sleep variable

#*7762# SMS Bearer CS Activated

#*7957# Command #*7957# Executed

#*8465# Time in L1 +data

#*9278# Command #*9278# Executed

#*9795# WTLS key Reset

#*2252# Current call: +data

#*2836# AVDDSS Managment Deact.

#*3877# Dump of SPY trace: +data

#*7728# RSAV done

sharp reset EEP

1, push at once key 0+3+right option key up+red key (white screen)

2, in sequence push key 0,1,2,3, right option key up,1 (service menu)

3, write 99 and push right option key up

4, write 01 and push right option key up (now start RESET EEPROM)

Wait.....

5, push any key

6, push blue key menu (save)

7, power off

Sharp GX-10 unlock solution

With Sim Card (of locked network) in phone:

*01763*6371# and press M.

In menu go to: SETTINGS->SELECT->SECURITY

then in Security menu:MEP LOCKS->SELECT

insert default security code 0000

In menu go to NETWORK and choose DEACTIVATE

press SELECT and insert 812664697614

Press OK, phone anwser will be:

Sony-Ericssion

*#06# Imei Number.

>*<<*<* Software version.

*#0000# Default English.

Hive: HKEY_CURRENT_USER 
Key: Software\Microsoft\Windows\CurrentVersion\Policies\System 
Name: DisableTaskMgr 
Type: REG_DWORD
Value: 1=Enablethis key, that is DISABLE TaskManager
Value: 0=Disablethis key, that is Don't Disable, Enable TaskManager 


As part of the enhanced management available in Windows 2000 and Windows XP, rather than risking a registry change, as an administrator you can enable or disable Windows 2000 Pro or Windows XP Pro's TaskManager using Group Policy Editor. This can be applied to the local policy. Note: if you are trying to override your organizations group policy, you can't. As soon as you re-authenticate to the domain, the domain or OU Group Policy will rewrite the registry setting. But if the TaskManager was accidently disabled or you need to control this item for a set of standalone boxes this is for you: 
Click Start 
Click Run 
Enter gpedit.msc in the Open box and click OK 
In the Group Policy settings window 
Select User Configuration 
Select Administrative Templates 
Select System 
Select Ctrl+Alt+Delete options 
Select Remove Task Manager 
Double-click the Remove Task Manager option 
And as I mentioned above, since the policy is Remove Task Manager, by disabling the policy, you are enabling the Task Manager. 

Got XP Home - use the registry edit. 

To enable registry editor that was disabled by some malware please do the following to regain access and perform maintenance:

Enable Registry Editor using Group Policy Editor 
1. Click on the Start > Run and type ”gpedit.msc” on the field (without “).
2. Navigate to:
- User Configuration
- Administrative Templates-
- System.

3. On the option: Prevent access to registry editing tools
4. Click Disabled and click on the OK button to save settings.
5. Reboot your computer.

Enable Registry Editor Using Free Tool
RRT or Remove Restrictions Tool is a free tool to enable access to different Windows process disbaled by virus infections.

This tool is used to enable access to:
- Registry Tools (regedit)
- Ctrl+Alt+Del
- Folder Options
- Show Hidden Files

Download RRT: click here to donwload

Enable Registry Editor Using Registry Keys
If the above procedure does not work. You may also use a tool to reset registry keys here. Make sure to backup your registry before making any changes.